Monday, February 22, 2016

Samsung Galaxy S7 & S7 Edge Officially Announced

Today at the Mobile World Congress, Samsung announced its long-awaited additions to the Galaxy product line: Samsung Galaxy S7 and Samsung Galaxy S7 Edge. The launch confirmed many of the rumors that preceded the announcement, discarding others. The devices look almost exactly as we saw earlier in past leaks and as expected, both pack some impressive features.

Samsung Galaxy S7 comes with a 5.1-inch Super AMOLED display with a resolution of 2560 x 1440 and a display density of 577 ppi. On the other hand, Samsung Galaxy S7 Edge has a 5.5-inch display with the same screen resolution. Samsung Galaxy S7 has a dimension of 142.4 x 69.6 x 7.9 mm and weighs 152g. The S7 Edge is a little thinner and measuring 150.9 x 72.6 x 7.7mm. It also adds a few grams to bring the mass to 157g.
Both devices have IP68 waterproof rating, making the phones properly water-resistant. Although the camera is only 12MP which is a bit low compared to the Samsung Galaxy S6, the technology behind the new camera makes it superb. It has a wide aperture of f/1.7 and there is smart optical image stabilization to give great pictures. The new Dual Pixel Technology makes a great low-light photography and rapid auto-focus.

As for the interior, both devices are powers by Qualcomm Snapdragon SoC 820 and Samsung Exynos 8890. There are speculations that the processor choice is going to be market dependent. There is a 4GB RAM with LPDDR4 technology and internal storage option is set at 32GB and 64GB. Samsung has finally reintroduced the SD card slot and supports up to 200 GB external storage.

The S7 comes with a 3000mAh battery and the S7 Edge has a more bigger battery with a capacity of 3600mAh. Both support wired and wireless Fast Charge, which can be switched on and off. While most OEMs are going for USB Type-C Samsung choose to stick with the same old micro USB 2.0 connectivity port.
As expected, TouchWiz is now powered by Android 6.0 Marshmallow. Samsung has released an officer introductory video for both devices.

Image Credits: @SamsungMobile on twitter

Friday, February 19, 2016

The Gionee M5 Mini has been launched with 4000mAh Battery

Few weeks ago, we talked about the Gionee M5 mini, the latest smartphone from Gionee and if you are anticipating, you would be excited to find out that it was launched a few days ago and reports has it that the Gionee M5 Mini, will give other phones in the block a good run for their money.

As speculated the Gionee M5 is within a dimension of 5.7x 2.8X 0.4 inches with a weight of 189.5g, the screen is built from the HD IPS technology to ensure share of high-quality pictures and is powered by a 5 contact-point capacitive multi-touch.

Just like the Huawei G-Power, the Gionee M5 mini has a 4000mAh battery with a super charge function, which they claim charge in ten minutes and delivers enough power for one and a half hours of talk time, more than two hours of non-stop music or nearly two days on standby.

Asides all that battery juiciness, the Gionee M5 Mini will also serve as a power bank to other phones with its reverse charging technology. If it's on the memory, you are looking for an internal memory of 16GB ROM + 2GB RAM which can be extended up to 128GB along with MT6580 chipset and a unit speed of 1.3 GHz.

For photo enthusiasts, the Gionee M5 Mini has a rear camera of 8MP and a selfie camera of 5 megapixels with some DIY and auto beauty facial features to enhance selfies.

Inbuilt is the Digital Theatre System, a compilation of multichannel audio technologies capable of discrete 5.1 and 6.1-channels of surround sound. With its (OTG) On-the-Go technology, users also have the freedom to connect their phones directly to other devices such as flash drives, keyboards to allow for ease and practicability. It also comes with WCDMA, Wi-Fi, Bluetooth 4.0, GPS and its dual sim dual have dual standby.

As stated earlier, the speculated price is between N25,000 - N30,000.

What do you think?

Thursday, February 18, 2016

How To Use The MTN Free Browsing on your Laptop

I have been using this both on my Android device and pc, but have gotten request from my friends and fans asking me how I did it. In this post, I will show you how to use this cheat on your laptop.

READ ALSO: MTN Latest free browsing for Android device

How To Use The MTN Free Browsing on Your Laptop
1. First Download this cutomized Simple Server for MTN Free Browsing. Extract it to a folder in your laptop.

2. In your Modem Settings, use the following bellow
Proxy: leave it empty
Port: leave it empty

3. Configure your browser and Download manager to use
Port: 8080

NOTE Tick: "Use this proxy server for all protocols" if you want it to open all secured sites.

4. Double-click on the Simpleserver.exe you extracted earlier and always make sure it is open

Now you can enjoy free unlimited free browsing. Thanks.
If you have any problem, kindly let me know using the comment box.

Gmailify: How to Use Gmail Without A Gmail Account

This is really cool of google.
Google is offering Yahoo and Hotmail / Outlook users the ability to Gmailify their accounts. What this means is that Google wants the nations to enjoy a taste of what Gmails users enjoy, including Google Now cards, spam and inbox organization.
To get started, you need to enable Gmailify function by opening the Android app, tap the menu icon, click Settings, tap the non-Gmail account you want to link and then link to the account.

That's it, my dear Yahoo and Hotmail brothers and sisters, you're very likely to enjoy the good life.

Airtel Now Offers 3GB Data Plan for N1000

Interesting.. Airtel now offers 3GB data plan for just N1000.
It seem as if Glo and airtel are in the race to becoming Nigeria cheapest telecommunication network when it comes to data.

The company - Airtel - recently launched a new data plan that will give you 3GB of data for just N1,000. The data will last for a month and is open to everyone and everything.

Airtel users can now enjoy this cheap data plan. To subscribe, dial *431#.
To check your balance, dial *140#.

Right now, which Telco has the cheapest data plan?
I say GLO, what about you?

Monday, February 15, 2016

Blackberry Priv Arrives Nigeria with a Price Tag of ₦215,000

Months after the device has been officially launched, Blackberry Priv finally arrives in Nigeria at a fairly reasonable price. Late last year, we spotted the device on jumia for almost ₦250,000. Currently, it is available on slot for ₦220,000 and on Jumia, you can buy it at a lower price. A current listing on Jumia has a price tag of ₦214,000.
Blackberry Priv is the first Android device from Blackberry and from the looks of things, the company's wholly going into Android this year. There are reports of the company plans to launch more Android devices and we saw one already code-named BlackBerry Vienna.

Blackberry Priv main selling point is privacy, hence the name, Priv. It comes equipped with Android Lollipop, but because Blackberry is known for timely software updates, we should expect the device to geta Marshmallow update and then, perhaps Android N.

Since the release of the phone, Blackberry stocks were going down to the south started looking good. The last quarter report showed a much better profit margin of the company, which is starting to rely on the verge of losing it all to win.

The launch of the Blackberry Priv is a turning point for the company and according to a top executive of the company, there will not be BlackBerry 10 OS devices as Blackberry is now putting the focus on producing more Android devices.

As mentioned earlier, a listing of the device Jumia has a price tag of about ₦210,000. It has a 32GB internal memory, 3GB RAM and 18MP rear camera with optical image stabilization. It has a 5.4-inch AMOLED screen protected by Gorilla Glass 4. The device is powered by an octa-core processor, a Qualcomm Snapdragon 808 chipset. A good battery life is guaranteed by the 3410 mAh battery.

Although the device has received many positive reviews online, many people believe that the device is too expensive and it's not really worth the price. Do you have the same opinion?

HTC is working on Windows 10 Mobile phone and Plans to launch its SmartWatch

HTC is one of the most popular phone makers; the company has built some really good smartphones from each category. The company had launched back HTC One M8 Windows Phone in 2014, but it seems that they are planing for yet another Windows phone. A job posting on the Microsoft Website, it seems that HTC is planning to work on a Windows 10 smartphone. It seems finally also that HTC will launch its SmartWatch.

Windows 10 Mobile is the latest operating system from Microsoft for mobile phones. As of now the company has this operating system available for only a handful of devices like the Lumia 650 and Lumia 950, made along with a few other Lumia smartphones. The company is also looking to offer 10 Windows Mobile update the Lumia 520 in the coming weeks. According to Microsoft, the HTC is one of the company's top third party makers.

In other news, HTC is also looking to launch its ever first SmartWatch in the market. According to the leakers, Evan Blass, the Taiwanese company is looking to launch its SmartWatch very soon. He says that one of the most anticipated smartwatches from HTC will go on sale by April this year. So far, many rumors have surfaced about this SmartWatch for a very long time.

This SmartWatch was spotted on a video from a company last year, but so far HTC has revealed no details about the watch. Peter Chou, CEO of HTC said on the wearable device, "We try to be very careful instead of just putting out anything, so we continue to work on it."

Some rumors have claimed that the smart portable device from HTC will be named as the HTC One SmartWatch and will be launched in February 2016. The mobile company is expected to launch the HTC One M10 in the MWC 2016, which is expected to start next week . The company may launch its first SmartWatch at the same event, but nothing is certain at this time.

Huawei Launches the G Power Exclusive to Jumia, See Specifications and Price

For those who are anticipating, Huawei G Power has been launched exclusively to Jumia! And we have the price tag.

Huawei, which is the third smartphone maker in the world, has decided to make a mid-range device with a USP geared towards longer life of the battery. For those who are unaware of the specs, below is the specs:

5-inch 720p IPS display
64-bit quad-core chip clocked at 1.3GHz
2GB of RAM
16 GB of internal memory (confirmed) with expandable memory
Android 5.1
Dual SIM
13-megapixel autofocus rear camera with LED flash
5MP front camera
4000mAh battery with fast charging, Reverse Charging
OTG supported

Huawei G Power is available in three colors: gold, white and gray. However, it seems only white and gray can be found at Jumia, the gold color is not yet available.

Now we have been waiting for the part, Huawei G Power will be priced at N46,500 !! Also, when you buy the device from Jumia, you will get a Bluetooth speaker swan worth N15,000.
Also bear in mind that the bluetooth speaker will only be available for the first 300 customers.

Considering the price of the phone, what's your though on this?

Saturday, February 13, 2016

Latest: MTN Unlimited Free Browsing Cheat

Hi guys, welcome to this beautiful waiting post. It's time to forget about that MTN music+ Megabytes. Now you can enjoy mtn unlimited free browsing and surfing with your MTN Sim, does not require magic IP and involved no subscription. All you need is your Android smartphone, an MTN Sim with N0.0kobo and Sypon Shield VPN.

Sorry for the delayed post. You might have heard about this tweak before now, but as you know, I have to confirm every tweak before it goes live here.

The speed is amazing. You can use your installed Psiphon Handler Netify VPN, or download Sypon Shield v3.1.3 for stable connection here

Use your MTN default settings or create a New APN setting on your phone as follows:
Open your phone settings >> Go to More >> Go to Mobile Network >> Access Point Names >> Select MTN, create new APN and configure as shown below:

Port: 8080
Save and activate as your default settings

Then start Sypon Shield or Psiphon Handler, in the handler menu:
Proxy Type: Real Host
Proxy server: or or
Real Proxy Type: Default
Real Proxy server: (leave blank)
Select Save and click "tunnel entire device."
Click on the option tab
Region: select USA or any other server
Select more options, as shown in the screenshot below
Check Connect through an "HTTP Pro" and select "Use the following settings:" then configure.
Host address:
Port: 8080
Save and click Connect. Now you can start browsing absolutely free with your MTN SIM.

Enjoy while it last. If you have any problem or cheat, do let us know using the comment box. Thanks

Wednesday, February 10, 2016

Samsung Galaxy S7: Live Images + Crazy Antutu Benchmark Score

Samsung Galaxy S7 is likely to be unveiled this month, but we have more juicy details about the upcoming device. We have seen pass through the Geekbench 3 but Antutu benchmark score is even more impressive. It is the highest we've ever seen on an Android device.

Last year, Apple took over Antutu, beating the fastest Android phone on the list, Huawei Mate 8, by a very wide margin, but Samsung is consistent with the Samsung Galaxy S7. The benchmark score is very impressive and as a matter of fact, this makes it a smartphone to actually look forward to.

Thanks to, we saw a picture of the Samsung Galaxy S7 Edge and the picture showed the device scoring 134,704.
This is the highest we've ever seen on any other phone. The only device that comes close to this is the iPhone 6S Plus with a score of 132620. We do not know whether the version of the Samsung Galaxy S7 Edge tested sport Exynos 8890 or Qualcomm Snapdragon 820, but it is likely to be the latter.

Regarding the specifications, Samsung Galaxy S7 Edge should sport a 4GB RAM, a 12MP rear camera, a 3600mAh battery, a "5.5" curved screen with 2k resolution and it is expected to be powered by Qualcomm Snapdragon 820.

This device puts Samsung in a much better position to compete with the iPhone 6S and iPhone 6S Plus. Anyway, Apple has the iPhone 7 on the road and it looks like an interesting year ahead in terms of competition.

Samsung Galaxy S7 Edge Confirmed to Pack 3600mAh battery

Samsung has learned from its past mistakes and now hopes to redeem itself in the eyes of the fans with this year's flagship, the Galaxy S7.

One of the drawbacks of the Galaxy S6's, is the relatively small capacity and non-removable battery, it can probably be addressed in the next Galaxy S smartphone.

According to the latest rumors, Samsung will add a 3000 mAh battery in the Galaxy S7 and much larger 3600 mAh battery for the Galaxy S7 edge.

Although the information has not yet been confirmed by the South Korean company, we have evidence that the Galaxy S7 edge will be powered by a 3600 mAh battery.

Both the Galaxy S7 and Galaxy S7 edge were recently certified by FCC (Federal Communications Commission), but the list of the documents filed with the Regulatory Commission for the larger model features a very special screenshot.

The Galaxy S7 edge screenshot shows the battery information, such as status, level, FCC certification, and capacity. It appears that the Samsung Galaxy S7 Edge will indeed be a 3600 mAh battery, which is said to have quickly pack on charging technology.

A 3000 mAh battery for Galaxy S7?

Unfortunately, Samsung Galaxy S7 documents filed to FCC do not include such a screenshot, so we are unable to confirm whether the smartphone will come with a 3000 mAh.
Another thing that Samsung fans might be interested in is the fact that neither will come with removable batteries.

Due to the glass-lined design, Samsung has decided not to include removable batteries inside the Galaxy S7 and S7 edge, but it is rumored that the users will be able to replace them with authorized services.
There is also the issue of the microSD card but Samsung seems to have solved it, by including hybrid dual-SIM support, which will allow you choose from adding an SD memory card or a second SIM.

So, there are a lot of changes that Samsung plans for the Galaxy S7, so many features not included in the previous flagship will make a comeback. But let's see what innovations will introduce the smartphone us (if any).

Tuesday, February 9, 2016

Smartphones with 7-day Battery Life to be here within 2years, Says Fuel Cell Maker

In Tech News Today..
The current smartphones may have features we never many thought possible for years, such as high-speed Internet access, biometric scanners, 4K video recording, and even limited VR capabilities, but all this comes at the expense of a region that many older cell phones are fondly-remembered for: battery life.

While many of the upcoming smartphones are said to have massively improved batteries, such as Samsung S7, they still needed fairly regular charge, especially when used intensively. But a UK-based company claims that it is developing a system that would allow a smartphone to work for a whole week before requiring a charge.

Intelligent Energy Holdings Plc said its hydrogen-based fuel cell will be small enough to fit in a smartphone yet powerful enough to keep it running for seven days, and could be available to the public within two years.
The company said an "emerging" smartphone maker is so impressed with the technology that it is investing $7.6 million in its development, reports Bloomberg.

"Embedding fuel cell technology in portable devices offers a solution to the current dilemma of battery life," Julian Hughes, Acting Director Consumer Electronics division Intelligent Energy, said in a statement. "With consumers demanding more and more from their phones, did not maintain the battery innovation."

Intelligent Energy Holdings Plc has 25 years experience in the field of energy and has already worked on a zero-emission, hydrogen-powered black cab in London and a fuel cell powered aircraft for Boeing. The technology works by converting hydrogen into electricity, leaving only water as a byproduct.
Last year the company unveiled a prototype iPhone 6 which uses hydrogen fuel cells. The only change from the original design was some small rear vents so could escape an imperceptible amount of water vapor.

There are still some hurdles to overcome, but should Intelligent Energy Holdings technology' find its way into commercial smartphones, charging our devices almost every day can be a thing of the past.

Instagram Adds Multi-Account Support for Android and iOS apps

Latest Tech News Today
The people behind Instagram has just announced the addition of a very important new feature for both Android and iOS application, multi-account support.

With the new feature, Instagram users will be able to switch between their accounts on Instagram in a quick and comfortable way.

If you have more than one Instagram accounts, you can now add as many as you want on your way to your profile settings where a new option that will allow you to create an additional account.

All you have to do is make sure you add different photos to your profile, so that you can easily tell which one you are currently using at any given time.

"Starting this week, you can switch quickly and easily between multiple accounts on Instagram. To do so, simply go to your profile settings to add an additional account. From there, tap your username at the top of your account to switch accounts.
Once you've added multiple accounts, you will see your profile picture appear in places in the app, so you can always see the account you're currently using, "explain the developers in a blog post.

Management or add multiple Instagram accounts
Please note that this feature is only available for Instagram version 7.15 and higher, but if you already have the updated application and still can not switch accounts, you will have to wait because this is a change that developers have to do on the server side.

If you do not have the application yet, you can download Instagram for Android free from Google Play Store. The application should be fully compatible with all devices running its Android 4.0 and higher.

For iOS users, the application can be downloaded for free from the App Store. It should operate smoothly on all devices running iOS 7.0 or later.

Friday, February 5, 2016

Netify VPN settings for MTN BIS On Android

I have received messages for settings on Netify VPN for all networks unlimited browsing. It has the same settings for Psiphon Handler and Syphon Shield Handler.

In this post, I will explain to you how to successfully use Netify VPN to power both Mtn Music Plus and Mtn Bblite.

Mtn Music Plus extension seems to be renewing for some people while for others some people, once or twice a week.
With these settings you can successfully use VPN Netify make your Mtn Music Plus and Bblite work fine.


It is completely redesigned with new graphics
No connection key this time on the notifications bar
There is no place to add or remove regions or countries. (Still working)
The default handler settings there, but with a new user interface
New Icon added.

Download Netify VPN apk HERE

Netify VPN settings for Mtn Bblite

1. Download Netify VPN from the above link and install it

2. Netify VPN settings
tick Port

Proxy type: Use Dual Real Host or Real Host
Both of them works.


3. In the More Handler Settings
Tick Connect Through a Http proxy
Tick Use the Following Settings

Host Address:
Port: 8080

Click back to Save, On your data and

Enjoy the speed.

NOTE: If the speed becomes slow, off your data and on it again or u activate and deactivate flight mode,….
If you have any problem, ask in the comment box.

Thursday, February 4, 2016

Download Simple Android Server Premium Version 4.0.0 Free

We all know that the Simple Android Server is no longer completely free.
Before you can enjoy SAS Premium service, you have to pay N356.49 per week or N831.81 per month. Few days back, an updated version of SAS premium was released, which is version 4.0.0, now the cracked version of the new v4.0.0 is available. It's time to flex Premium Simple Server v4.0.0 Android for free!
Thanks to Miniano Gidafi for cracking this app. Now you can use SAS cracked version to gain access to SAS Premium Service without paying a dine and no annoying ads or speed throttling.

You won't believed on till you give it trial, the cracked Simple Android Server works like magic, you guys need to feel it.


Simple Android Server V4.0.0 Configuration With MTN BBlite, BBmidid or Music Plus

Dial any of the below codes to subscribe to your favorite MTN BB10 Lite Plan.
For Daily plan, dial *216*3*1# Cost N70 (Bblited)
For Weekly plan, dial *216*3*2# Cost N350 (Bblitew)
For Monthly plan, dial *216*3*3# Cost N1000 (Bblitem)
» Open your Simple Android Server v4.0.0
» Click Set Connection Mode and select VPN
» Click Connection Settings, tick Enable Proxy and in Proxy Host and Port, input and 8080
» Also, tick Enable Header Tweaking
» In Tweak Type, select Host Replacement
» In Injection Host input or, for music plus it will be
» In the VPN Settings, don't touch anything there, unless you want to connect your hotspot
» In Local Server Settings, remember that you have already chose VPN, so you have nothing to tamper in Local Server Setting.

Note that, Simple Android Server no longer required the use of and 8080 in system network settings, so you can use any setting with or without ip and port. Also, you don't need Autoproxy or ProxyDroid before it can power all your apps!

Important Notice
It is better you uninstall the previous version, before you install this new one and configure it exactly how you see here without ticking or inputting any other thing.

Download Huawei Mate S (CRR-L09) 5.1.1 Lollipop B145 Firmware

Huawei Mate S (CRR-L09) officially released for European countries, including Sweden and is now available for download.

Huawei Mate S (CRR-L09) 5.1.1 Lollipop B145 Firmware Details
Device: Huawei Mate S
Model: CRR-L09
Android: 5.1.1 Lollipop
EMUI: 3.1
Firmware: B145
Build Number: CRR-L09C432B145
Cust Number: CUSTC432D003
Date: 21.12.2015
Region: Europe
Country: Sweden
Code: 05013FSY
Status: Official (Stable)
Type: Full firmware
File Name: HUAWEI_Mate S_firmware_CRR-L09_Android 5.1.1_EMUI

This site or the developers are not responsible if you damage or brick your device. Do it at your own risk
and follow the instructions correctly.

How To Update Huawei Mate S (CRR-L09) 5.1.1 Lollipop B145 Firmware

Download Link Huawei Mate S (CRR-L09) | Size: 1.46GB

To install this firmware, simply extract the "dload" folder from the downloaded Zip package and copy it to the phone memory. Then open the Updater app, select Local update from the menu and select the full package. The device will reboot and flash the new firmware within a few minutes after you start the installation.

That is it! Your Huawei Mate S (CRR-L09) now Android 5.1.1 Lollipop have on your phone! To check, go to Settings, About phone.

Bliss Custom ROM Android 6.0 Marshmallow For HTC One (M8)

HTC One M8 Bliss custom ROM comes with many new features and is based Android 6.0 Marshmallow. A quick overview of the main features at Bliss below and we are sure you would like to use this on your HTC One M8.

Android 6.0 Marshmallow
A lot of customization options
Fast and Smooth

This site or the developers are not responsible if you damage or brick your device. Do it at your own risk and follow the instructions appropriately.

How the Android 6.0 Marshmallow Bliss Custom ROM Flash on the HTC One (M8):

Step 1 - Download Android 6.0 Bliss ROM for One M8 on your computer and extractboot.img from the zip file separately. Download Google Apps too.

Step 2 - Connect and mount HTC One M8 USB memory you to your computer using the USB cable.

Step 3 - Now copy/paste the downloaded Android 6.0 ROM zip and Google Apps zip files to your phone memory/SD card. Make sure the file is in the phone memory/SD card root (not in a folder).

Step 4 -. Copy/paste the boot.img file to android-sdk-windows\platform-tools directory

Step 5 -. Then turn off your phone and disconnect the USB cable

Step 6 - Now get into the Bootloader/Fastboot mode. Turn on the phone while holding down the Volume Down + Power buttons.

Step 7 - Once in the Fastboot mode (on your phone), go to android-sdk-windows\platform-tools directory (on your computer) and open Command Prompt (Shift + Right-click Open Command Prompt).

Step 8 - Type the following command and press Enter. fastboot flash boot boot.img

Step 9 -. Then type the following command and press Enter
fastboot reboot

Step 10 - Follow the navigation instructions on the screen. Select bootloader and then go to recovery.

Step 11 - Once you are in TWRP Recovery , perform a full data wipe, by Tapping the "Wipe" button. swipe to the "Swipe Factory Reset" option at the bottom.

Step 12 - Now go back to the main menu and then press the 'Install' button. From the list, select the ZIP file that you copied to your phone memory in step 3.

Step 13 - Confirm the installation on the next screen with the "Swipe to confirm flash" option. The installation procedure should begin

Step 14 -. When the installation is complete
Google Apps: Repeat the above step for the GApps zip file as well and install it on your phone.

Step 15 -. Press the button "Wipe Cache / Dalvik" if you are in any boot loops or other problems.

Step 16 -. You can now reboot your phone by selecting "Reboot System" button.

HTC One M8 will now start and it may take about 5 minutes to boot the first time after flashing a new ROM. So, please be patient and enjoy

Updated: Download KINGROOT V4.80 - The Best One Click Root Tool For Almost All Devices

KingRoot – Best One Click Root Tool For Almost All Devices.

Thanks to the developer of this application, it has turned out to be good by rooting 1000 Android devices. KingRoot is a great tool for "lazy people" who just want to get root access, but do not wish to flash third parties Recovery into their wonderful device. It is one of the most famous root tool in China and now we have English version here for everyone, totally free and without AD.

Something interesting will happen when you root your device by KingRoot, Root the most appropriate strategy will be deployed from the cloud, which is why we have a higher chance of success that some other tools. Concretely, more than 60% success rate on supported device root.

How To Root using KingRoot?
1. Download the apk below
2. Install it in your device.
3. Enter the ready! King Root, all other things for you.

Supported Devices List Dismiss

  • List of Samsung Devices : Here
  • List of Google/Nexus Devices : Here
  • List Of Htc Devices : Here
 Kingroot - For me it is just the best
Download Kingroot v4.80 Apk

For Window
Download Kingroot v4.80 Apk

Wednesday, February 3, 2016

How I fixed Invalid IMEI and Sim Not Detected on My Android Device

Hello readers of this blog, thanks for stopping by. If you are reading this post, it's probably because you ported a custom ROM to your android device, and either your device keeps showing Invalid IMEI or SIM Not detected, right?

In this post, I will be explaining the easiest and most effective method to fix this problem. This method I will be explaining, is the same method I used to fix this same problem on my Tecno H6. Enough with the talk, lets get straight to the point.

Requirements to fix Invalid IMEI and Sim Not Detected on My Android Device
1. Root Explorer

Now Follow the steps below carefully to fix your device IMEI problem.

Step 1 Open the root explorer you just downloaded, goto data, scrow gently till you find a folder named "NVRAM". tick the box next to it to select it. Now copy the folder and paste it in the root of your SDCARD.(Memory Card)

Step 2 Still in the explorer, swipe to the right to go to your memory card, locate the folder you stored the downloaded CWM IMEI FIX file. Extract it. NOTE: The step 2 can also be done using other extracting tools, like WINRAR for android, File Explorer

Step 3 Now open the file you just extracted, that is the CWM IMEI FIX, scrow gently till you find a folder named "NVRAM", delete the folder.

Step 4 Now copy the "NVRAM" folder you copied earlier to the root of your SDCARD, (Read Step 1, if you don't understand this step. and paste it in the file you extracted. That is in the CWM IMEI FIX, where you deleted the first "NVRAM" folder. Got it right?

Step 5 The next step is to rezip the file you extracted. That is the CWM IMEI FIX. Rezip it, then copy and paste to the root of your memory card.

Step 6 Now boot your device to recovery mood, and flash the rezipped file, that is the CWM IMEI FIX without wiping anything.

Once done, you'll get your invalid IMEI and SIM not detected error fixed.

Do you have any problem fixing this, do let me know using the comment box, I will gladly help. Thanks and Stay connected for more Android tutorials.
Please share this post. Thanks

Monday, February 1, 2016

Earn Money From Your Mobile Website Using FAN Ads

Facebook has announced the expansion of the Audience Network to support mobile web, inter alia, increasing the value of native ad formats and people-based marketing to a new set of publishers and allows 2.5 million Facebook advertisers to reach more of the people they care about on mobile devices.

What this simply means is that publishers can now monitize their high quality content with Facebook ads and advertisers can now extend their campaigns beyond Facebook, mobile apps and mobile websites.

Prior to this announcement, Facebook Audience Network (FAN) only allowed app developers to monetize their mobile apps by using Facebook's powerful advertising platform. Now that has been extended to mobile web, you can now monetize your iOS and Android apps, as well as mobile websites with targeted ads.

With Facebook Audience Network (FAN), you can now get instant access to various demands of 2.5M Facebook advertisers. Facebook takes the right ad to the right person - to improve usability and maximize your revenue potential.
Unlike other networks, the public network rewards quality publishers based on the value they create for advertisers.

Facebook Audience Network Ad Types

The Audience Network gives publishers and developers the ability to choose between three different ad units: banners, interstitials and native advertising.

All three ad units have access to the same great-targeted advertisers because the ads are automatically displayed on the device you selected fit.

For Mobile Web publishers, you can choose from native performing ad units, 300x250 medium rectangle and 320x50 banners to deliver advertisements from Audience Network. Each format is a simple JavaScript integration with your mobile website.

It is important to note that Facebook interstitial ads are not available for mobile web that is for just apps.

You can read FAN ad examples HERE

Below are the FAN native text ad below a blog post on the mobile view of the blog:
You might not see the test ads until it is fully approved by Facebook. Only admins of your Facebook mobile website can see them while pending approval.

Facebook Audience Network Payment
Payments are extracted when you accumulate at least $100 in revenue. You will receive payments on the 21th of each month for the balance of the previous month.

Facebook Audience Network Policy
To ensure that publishers are offering a high quality advertising experience, Facebook requires that all apps serving Facebook ads are in accordance with the Audience Network policy.

All apps and sites in the network will be assessed by automated systems or manually inspected for quality and compliance. Facebook promises continuous quality continues to adhere to the policies and native ad design to ensure guidelines.

How to get started With This FAN Ads
To begin, follow this guide to set up Audience Network in your apps and mobile websites.

Watch out :

When adding the banner code on your blog, set test mode = "true" if you want to test to see Facebook ads. If you can see test ads, your implementation works correctly and people will be able to see ads in your app once it's live after approval by Facebook.

You will be notified by email and Facebook alert when your app is approved. Approval might take few business days.

You can also checkout the Facebook Audience Network FAQs.